Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
>
Teflon heat shrink tubing for medical equipment

Information details

Teflon heat shrink tubing for medical equipment

  • Categories:Industry news
  • Author:Miss PTFE tube
  • Origin:Miss PTFE tube
  • Time of issue:2007-12-21 15:21
  • Views:

Teflon heat shrink tubing for medical equipment

  • Categories:Industry news
  • Author:Miss PTFE tube
  • Origin:Miss PTFE tube
  • Time of issue:2007-12-21 15:21
  • Views:

  The application fields of Teflon tube and Teflon heat shrinkable tube are very wide. details as follows:

  1. Special Teflon heat-shrinkable tubing for medical equipment

  Product description: Teflon heat-shrinkable tube is made of high-quality PTFE material extruded and expanded, which has outstanding wear resistance, oil resistance, chemical corrosion resistance and high temperature performance. It is suitable for occasions requiring high temperature, and is used for insulation protection and pressure relief of connection welding and area identification of covered components.

  Teflon heat-shrinkable tubing for medical equipment application: -80℃--300℃, starting shrinkage temperature of 280℃, suitable for occasions requiring high temperature, the product is mainly used for insulation protection and pressure relief of connection welding and covering components Area identification, as well as electronics, medical, aviation, military and other aspects.

  Special Teflon heat-shrinkable tubing characteristics for medical devices: project characteristics require project characteristics specific gravity g/cm32.10

  Shrinking temperature ≥280℃

  Tensile strength Mpa20.5

  Absorption rate≤0.01%

  Bending strength Mpa400

  Axial shrinkage (%)≤5%

  Impact strength-NOBreak

  Elongation at break (%)330

  Hardness ShoreD85

  Air oven aging 300℃

  Friction coefficient 0.10.52

  Flammability VW-1

  Tensile strength after aging (Mpa) 20

  Elongation at break (%) 200

  Dielectric constant 2.1

  Volume resistivity (Ω/cm)>1018

  Breakdown strength (KV/mm) 30

  Arc coefficient>300

  Flammability VW-1

  Weather resistance NOBreak

  Concentric rate (%)≥60

  Chemical resistance Excellent

  Operating temperature (℃) -80~300℃

  2. Teflon tube for mold temperature machine

  The main purpose of the mold temperature machine is to heat the mold to speed up the production schedule. The mold temperature machine can control the mold temperature more uniformly, improve the molding efficiency of the product, reduce the occurrence of defective products, improve the appearance of the product, resist product defects, speed up the production schedule, reduce energy consumption and save energy.

  Mold temperature controllers are widely used in plastic molding, light guide plate die-casting, rubber tires, automotive interior parts, rollers, bio-pharmaceuticals, chemical reactors, bonding, banburying and other industries. It is environmentally friendly, energy-saving, fast and safe, with high heat source utilization, no manual operation, and cyclic temperature control. With the reduction of traditional limited energy and the increase of market demand, mold temperature controllers are becoming more and more recognized by everyone as a new heat source providing equipment.

  Because the mold temperature machine has the function of temperature control, the Teflon tube comes in handy.

  Teflon performance:

  1. Non-sticky: Teflon is inert, almost all materials are not bonded with Teflon, and the thin film also shows non-stick performance.

  2. Heat and cold resistance: Teflon has excellent heat and low temperature resistance. In a short time, it can withstand temperature to 300℃, melting point is 327℃, and it will not melt at 380℃. Generally, it can be used continuously between 240℃ and 260℃. It has remarkable thermal stability. It can work at freezing temperature. No embrittlement, cold resistance to 190℃.

  3. Lubricity: Teflon has a low coefficient of friction. The friction coefficient changes when the load is sliding, but the value is only between 0.04-0.15.

  4. Non-hygroscopicity: The surface of Teflon does not stick to water and oil, and it is not easy to stick to the solution during the production operation. If there is a small amount of dirt, it can be removed by simply wiping. Short downtime, saving working hours and improving work efficiency.

  5. Corrosion resistance: Teflon is hardly corroded by chemicals, and can withstand all strong acids (including aqua regia), strong alkalis, and strong acids except molten alkali metals, fluorinated media, and sodium hydroxide above 300°C. The role of oxidants, reducing agents and various organic solvents can protect parts from any kind of chemical corrosion.

  6. Weather resistance: non-aging, the best non-aging life among plastics.

  7. Non-toxic: In normal environment within 300℃, it is physiologically inert, non-toxic and can be used as medical and food equipment.

  8. Insulation: Very good dielectric constant and high insulation.

  

img

 

Picture 1: Teflon tube source: Shenzhen Dankai

  Three, the role of 3D printer Teflon tube

  3D printers have a historical headache, which is easy to plug! Many people guess that the temperature of the throat is too high, so many manufacturers now switch to the throat with built-in Teflon. The thermal conductivity of Teflon and stainless steel is low. , Can effectively reduce the temperature of the throat, using Teflon throat, the plug failure rate is significantly reduced.

  Due to the excellent performance of Teflon, it is currently used in a wide range of applications. It can be used for pipeline anti-corrosion, high and low temperature resistance, and corrosion resistance. Used in harsh environments such as lubrication, electronics, electrical appliances, aerospace, and medical treatment.

  Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor was Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, which was established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes. R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号