Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
>
What is the end plate of the pfa heat exchanger? What are the characteristics of the end plate of the PFA heat exchanger?

Information details

What is the end plate of the pfa heat exchanger? What are the characteristics of the end plate of the PFA heat exchanger?

  • Categories:Industry news
  • Author:PFA tube lady
  • Origin:PFA tube lady
  • Time of issue:2008-04-19 15:21
  • Views:

What is the end plate of the pfa heat exchanger? What are the characteristics of the end plate of the PFA heat exchanger?

  • Categories:Industry news
  • Author:PFA tube lady
  • Origin:PFA tube lady
  • Time of issue:2008-04-19 15:21
  • Views:

  1. What is the end plate?

  The main function of the end plate and the sealing plate on each side of the terminal block is to prevent the metal part of the terminal from being exposed.

  In steel structures, the end plates are connected to the column flanges with high-strength bolts, often called end plate connections. The restraint of the end plate connection on the beam end can meet the requirements of rigid connection.

  2. Introduction to pfa

  PFA is fusible polytetrafluoroethylene. The English name of PFA is Polyfluoroalkoxy, and the Chinese name is: tetrafluoroethylene-perfluoroalkoxy vinyl ether copolymer (also known as: perfluoroalkylate, soluble polytetrafluoroethylene) Vinyl). The chemical properties of PFA FEP PTFE are similar, but FEP can only be used below 200 degrees, and PTFE cannot be injection molded. Specific gravity: 2.13-2.167 g/cm3, molding shrinkage rate: 3.1-7.7%, molding temperature: 350-400℃.

  Features and main uses of PFA: PFA is commonly known as fusible PTFE, and its various properties are the highest among fluoroplastics. It is widely used in the semiconductor industry, as well as medical, chemical anti-corrosion, automotive and other fields.

  3. Introduction to the end plate of pfa heat exchanger

  Name: pfa heat exchanger end plate, pfa round cake, PFA round rod, etc.;

  Uses: Fusion welding of Teflon FEP heat exchangers and other products.

  Physical and mechanical properties:

  

img

 

Figure 1 Physical and mechanical properties of the end plate of the pfa heat exchanger Source: Teflon tube sister

  Four, pfa heat exchanger end plate specifications:

  Diameter: 40, 50, 55, 60, 65, 70, 80, 90, 100, 110, 130, 150, 200

  Thickness: 30-45mm

  Unit (mm)

  Other diameters and thicknesses can be customized

  pfa heat exchanger end plate specification table:

  

img

 

Figure 1 Pfa heat exchanger end plate specification table Source: Miss Teflon tube

  Five, common problems of pfa heat exchanger end plate:

  1. PFA heat exchanger end plate production

  The home of Miss Teflon tube is an industrial brand.

  2. Main features of PFA heat exchanger

  PFA heat exchanger has excellent corrosion resistance: F4 is a chemically inert material, except for elemental fluorine at high temperatures, molten alkali metals, chlorine trifluoride, uranium hexafluoride, perfluorinated kerosene, and can be used in all media Work in.

  The PFA heat exchanger has good anti-scaling performance: the chemical inertness, surface smoothness, flexibility and high coefficient of expansion of the F4 tube make it difficult to scale on the heat transfer surface and ensure a relatively stable heat transfer coefficient;

  PFA heat exchanger has a long life and low overall cost: PTFE does not contain photosensitive genes, so it has excellent resistance to atmospheric aging. In strong corrosive media, its service life is 20 to 30 times that of stainless steel.

  The heat transfer performance of the PFA heat exchanger is good: due to the small diameter of the pipe, no temperature gradient, and the thin-walled pipe, it overcomes the shortcomings of low thermal conductivity of PTFE materials, and its total heat transfer coefficient can reach 200-350 ( W/m2.K)

  

img

 

Figure 1. The source of the end plate of the pfa heat exchanger: Miss Teflon tube

  3. Connection structure of heat exchanger tube and end plate

  Heat exchanger tubes and end plates. The end plates are provided with heat exchanger tube mounting holes, and an intermediate connecting sleeve is arranged between the heat exchanger tubes and the end plates. The front end of the intermediate connecting sleeve enters the heat exchanger tube mounting holes , The middle connecting sleeve and the heat exchanger tube mounting hole are connected through the external thread provided at the front end of the middle connecting sleeve and the internal thread provided on the wall of the heat exchanger tube mounting hole, and the end of the heat exchanger tube enters the middle In the inner hole of the connecting sleeve, the heat exchanger tube and the intermediate connecting sleeve are connected through an external thread provided on the heat exchanger tube and an internal thread provided on the inner hole wall of the intermediate connecting sleeve. The utility model can realize the quick connection between the heat exchanger tube and the end plate. The joints of the heat exchanger tube mounting hole, the intermediate connecting sleeve and the heat exchanger tube can all adopt standardized processing, which is easy for mass production and assembly. Simple, fast, and highly reliable.

  Six, the use of pfa heat exchanger end plate:

  PFA heat exchange equipment is also called plastic king heat exchanger or F4 heat exchanger. Its super anti-corrosion and anti-aging performance makes it widely used in chemical industry, pickling, electroplating, medicine, anodizing and other industries. At the same time, due to its resistance Excellent temperature performance, suitable for both steam heating and hot water heating.

  Miss Teflon tube home: Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor was Dongguan DanKai Insulation Material Co., Ltd. Fluoroplastic Material Factory, which was established in 1998, specializing in FEP , PFA, PTFE and other fluoroplastic tube, rod, sheet and film products and other insulating materials research and development, production, sales and services of intelligent enterprises. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe PTFE tube, Fep tube, Pfa tube, Pvdf tube; ②Heat-shrinkable tube: Ptfe heat-shrinkable tube, Fep heat-shrinkable tube, Pfa heat-shrinkable tube, Pvdf heat-shrinkable tube ; ③Board and rod film category: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral Tube, spring tube, peeling tube, welding rod, tee, straight, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号