Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
>
Ptfe extrusion tube

Information details

Ptfe extrusion tube

  • Categories:Common problem
  • Author:Miss PTFE tube
  • Origin:Miss PTFE tube
  • Time of issue:2001-07-10 15:21
  • Views:

Ptfe extrusion tube

  • Categories:Common problem
  • Author:Miss PTFE tube
  • Origin:Miss PTFE tube
  • Time of issue:2001-07-10 15:21
  • Views:

  Ptfe extrusion tube

  Polytetrafluoroethylene (PTFE extruded tube) has excellent chemical stability, can withstand all strong acids, strong alkalis, strong oxidants, and does not interact with various organic solvents. PTFE has a wide operating temperature range. It can be used for a long time at -180℃~250℃ under normal pressure. After 1000h of treatment at 250℃, its mechanical properties will change little. PTFE has a very low friction factor, is a good anti-friction, self-lubricating material, its static friction coefficient is less than the dynamic friction coefficient, so it has the advantages of low starting resistance and smooth running when used to make bearings.

  Because PTFE is non-polar, heat-resistant and does not absorb water, it is also an excellent electrical insulating material. It also has excellent aging resistance, non-stickiness and non-combustibility.

  Various profiles and parts made of PTFE, such as bars, tubes, films, bearings, gaskets, valves, etc., are widely used in machinery, chemical industry, aviation, electrical and electronics, defense industry, cutting-edge technology, medical and health, and electrical insulation And other fields.

  performance:

  1. High and low temperature resistance: -196--260℃ high temperature, twice the strength of F4. Non-sticky, fight water and oil, no fouling or flow inside and outside the pipe wall. Electrical reliability, high insulation 601HZ-60MH high and low dielectric constant viscosity is 2.1. Even if the surface is damaged by diving, it will not conduct electricity; track volume resistance> 10180M surface resistance> 2*10130M; arc resistance> 165 seconds without leakage.

  2. Corrosion resistance: only elemental fluorine at high temperature, alkali metals play a role with it, and have no effect on all other concentrated and dilute inorganic organic acids, alkalis, and esters; low water absorption: low absorption rate <0.01%;

  3. Non-combustibility: Will not burn in the air (oxygen index>95V0L%), non-toxic and physiologically inert;

  4. High transparency: the light refractive index is the lowest among all plastics; weather resistance: it can be exposed to ozone and sunlight for a long time;

  Ease of secondary processing: self-sealing, self-welding, flanging, and coiled pipes can be made. 

  Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor is Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号