Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |      CN

National Advisory Hotline:

0755-29979617
News Center

News Center

news center

Hot key words: Polyperfluoroethylene propylene(FEP/F46)     PTFE/PTFE/Teflon series     Soluble polytetrafluoroethylene(PFA)  

News

National Advisory Hotline:

0755-29979617
>
>
>
Dongguan PTFE tube manufacturer

Information details

Dongguan PTFE tube manufacturer

  • Categories:Common problem
  • Author:PFA tube lady
  • Origin:PFA tube lady
  • Time of issue:2002-09-01 15:21
  • Views:

Dongguan PTFE tube manufacturer

  • Categories:Common problem
  • Author:PFA tube lady
  • Origin:PFA tube lady
  • Time of issue:2002-09-01 15:21
  • Views:

  Dongguan PTFE tube manufacturer

  PTFE tube, scientific name PTFE tube (referred to as F4 tube, PTFE tube) is the use of high-quality plunger extruded tube, using special processing technology to make the steel tube and plastic tube tightly combined, can withstand positive pressure 1.6 Mpa, negative pressure: 77Kpa; it can be used normally within -60℃~+260℃, with reliable and excellent corrosion resistance. Transporting highly corrosive gases and liquids at high temperatures cannot be replaced by other pipelines. It is widely used in machinery, chemical industry, aviation, electrical and electronics, defense industry, cutting-edge technology, medical and health, electrical insulation and other fields.

  PTFE tube uses: wire insulation sheath, corrosive fluid medium pipeline, various electrical insulation parts used under high frequency, etc.

  PTFE tube features: PTFE tube has excellent chemical stability, can withstand all strong acids, strong alkalis, strong oxidants, and does not interact with various organic solvents.

  The temperature range of PTFE tube is wide, and it can be used at -180℃~250℃ for a long time under normal pressure. After 1000h of high temperature treatment at 250℃, its mechanical properties will change little.

  PTFE tube has a very low friction factor, is a good anti-friction, self-lubricating material, its static friction coefficient is less than the dynamic friction coefficient, so it has the advantages of low starting resistance and smooth running when used to make bearings. Because PTFE is non-polar, heat-resistant and does not absorb water, it is also an excellent electrical insulating material. It also has excellent aging resistance, non-stickiness and non-combustibility.

  The manufactured bars, tubes, films, bearings, gaskets, valves and other special profiles and parts are widely used in machinery, chemical industry, aviation, electrical and electronics, defense industry, cutting-edge technology, medical and health, and electrical insulation.

  Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor is Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2021 Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号