Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
How to solve the problem of loud noise of PFA tube extruder

Information details

How to solve the problem of loud noise of PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2003-04-11 16:12
  • Views:

How to solve the problem of loud noise of PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2003-04-11 16:12
  • Views:

1.PFA extruder bearing may have problems, leading to abnormal operation of the machine, operation current will vibrate. Operation current is high, need to stop the machine to check or replace the bearing.

2. The extruder's ring die is blocked, or only part of the die hole is blocked. If foreign matter enters the ring die, the ring die will lose circle, the gap between the press roll and the press die is too tight, the press roll is worn or the press roll bearing is damaged, and the extruder vibration can not roll.

3. The calibration of the coupling of the steel pipe extruder is unbalanced, with deviation of the left and right convex and convex, the extruder oscillates, the tooth shaft oil seal is easily damaged, and the coupling must be calibrated for the horizontal line.

4. The size and size of the twin screw extruder will wear out. If the single gear is replaced, the machine will produce noise during operation.

5. The main shaft of PFA pipeline extruder is not tight, especially the D-type or E-type machine, the loose shaft of the main shaft will move back and forth, the press roll will swing obviously, the extruder noise is big, and the extrusion is difficult. The spindle tail needs to be tightened with the butterfly spring and round nut.

For more information about PFA tube extruder, please continue to pay attention to Shenzhen Dankai Technology Co., LTD.

ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.

The company has a senior research and development team of international standards and imported fluorine plastic products production line, some fluorine plastic products passed ISO9001, SGS, FDA certification.

The main products are: ① pipe: PTFE polytetrafluoroethylene pipe, FEP pipe, PFA pipe, PVDF pipe; ② Heat-shrinkable tubes: PTFE heat-shrinkable tubes, FEP heat-shrinkable tubes, PFA heat-shrinkable tubes, PVDF heat-shrinkable tubes; ③ Plate and rod films: PTFE plate and rod film, FEP plate and rod film, PFA plate and rod film, PVDF plate and rod film; ④ Insulating materials: silica gel, PE, PVC, UPE, etc.; ⑤ Special class: PFA inlet joint, spiral pipe, spring pipe, rotary cut pipe, welding rod, tee, straight, gasket, joint, taper rod, flaring pipe, sealing pipe, braided pipe, corrugated pipe, etc. At the same time can be customized processing production of various specifications of fluorine plastic products.

This article by the teflon tube little sister original, welcome to pay attention to, take you together long knowledge!

Keyword:

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号