Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
How to regulate the operation of PFA tube extruder

Information details

How to regulate the operation of PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2003-05-24 10:41
  • Views:

How to regulate the operation of PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2003-05-24 10:41
  • Views:

1. Before each start, check whether there are foreign bodies in the PFA pipeline extruder barrel and hopper, whether the tightening

bolts are loose, whether the safety cover is firm, whether the position of each button switch is correct, and then add enough

lubricating oil to each lubricating part to make the equipment clean and sanitary.

 

2. Start the spiral motor at a low speed and check whether the ammeter pointer of the main motor swings normally. If there is

abnormal sound in the operation of the equipment or the spiral operation is unstable, it should be shut down immediately and find

the relevant personnel for maintenance.

Figure 1: Extruder 1    Source: Dan Kai

3. Empty operation test run of screw shall not exceed 3 minutes. When all is well, install the mold and install the mold connection

bolts. Before use should be coated with silicone oil or a layer of molybdenum disulfide for easy disassembly.

 

4. In the early stage of feeding production, the working speed of the screw is low, and the feeding should be less and even. Check

whether the pointer of the working ammeter swings abnormally to drive the screw to rotate the motor.

 

5. After the PFA pipeline extruder enters the normal production work, the operator should check the temperature change of the

bearing position frequently. When checking the temperature of the motor and bearing parts, the back of the finger should be gently

touched.

For more information about PFA tube extruder, please continue to pay attention to Shenzhen Dankai Technology Co., LTD.

 

ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and

service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.

The company has a senior research and development team of international standards and imported fluorine plastic products

production line, some fluorine plastic products passed ISO9001, SGS, FDA certification.

The main products are: ① pipe: PTFE polytetrafluoroethylene pipe, FEP pipe, PFA pipe, PVDF pipe; ② Heat-shrinkable tubes: PTFE

heat-shrinkable tubes, FEP heat-shrinkable tubes, PFA heat-shrinkable tubes, PVDF heat-shrinkable tubes; ③ Plate and rod films:

PTFE plate and rod film, FEP plate and rod film, PFA plate and rod film, PVDF plate and rod film; ④ Insulating materials: silica gel, PE,

PVC, UPE, etc.; ⑤ Special class: PFA inlet joint, spiral pipe, spring pipe, rotary cut pipe, welding rod, tee, straight, gasket, joint, taper

rod, flaring pipe, sealing pipe, braided pipe, corrugated pipe, etc. At the same time can be customized processing production of

various specifications of fluorine plastic products.

This article by the teflon tube little sister original, welcome to pay attention to, take you together long knowledge!

Keyword:

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号