Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |      CN

National Advisory Hotline:

0755-29979617
News Center

News Center

news center

Hot key words: Polyperfluoroethylene propylene(FEP/F46)     PTFE/PTFE/Teflon series     Soluble polytetrafluoroethylene(PFA)  

News

National Advisory Hotline:

0755-29979617
>
>
>
Teflon heating tube

Information details

Teflon heating tube

  • Categories:Industry news
  • Author:Miss Teflon tube
  • Origin:Miss Teflon tube
  • Time of issue:2000-12-12 15:23
  • Views:

Teflon heating tube

  • Categories:Industry news
  • Author:Miss Teflon tube
  • Origin:Miss Teflon tube
  • Time of issue:2000-12-12 15:23
  • Views:

  1. Teflon heating tube

  The commonly used Teflon heating tube is a new type of strong corrosion-resistant electric heater made of PTFE sleeve, which is used for heating various corrosive liquids. It has excellent aging resistance and good bending performance, and adopts a low surface load design.

  Teflon heating tubes can be divided into two types, one is to spray the surface of the heating tube directly with fluoroplastic material, and the other is to cover the outer layer of the iron heating tube and the copper heating tube with a fluoroplastic sleeve.

  Teflon heaters are electroplating, electrolysis, degreasing, pickling, electroless nickel and phosphorus plating, hydrofluoric acid, anodizing, aluminum plating, smelting, chemical, pharmaceutical, food and other corrosive liquid heating, condensation, evaporation, The best heater choice for concentration and more!

  

img

 

Picture 1: Teflon heating tube source: Shenzhen Dankai

  Performance of Teflon heating tube:

  1. Non-sticky: Teflon is inert, almost all materials are not bonded with Teflon, and the thin film also shows non-stick performance.

  2. Heat and cold resistance: Teflon has excellent heat and low temperature resistance. In a short time, it can withstand temperature to 300℃, melting point is 327℃, and it will not melt at 380℃. Generally, it can be used continuously between 240℃ and 260℃. It has remarkable thermal stability. It can work at freezing temperature. No embrittlement, cold resistance to 190℃.

  3. Lubricity: Teflon has a low coefficient of friction. The friction coefficient changes when the load is sliding, but the value is only between 0.04-0.15.

  4. Non-hygroscopicity: The surface of Teflon does not stick to water and oil, and it is not easy to stick to the solution during production operations. If there is a small amount of dirt, it can be removed by simply wiping. Short downtime, saving working hours and improving work efficiency.

  5. Corrosion resistance: Teflon is hardly corroded by chemicals, and can withstand all strong acids (including aqua regia), strong alkalis, and strong acids except molten alkali metals, fluorinated media, and sodium hydroxide above 300°C. The role of oxidants, reducing agents and various organic solvents can protect parts from any kind of chemical corrosion.

  6. Weather resistance: non-aging, the best non-aging life among plastics.

  7. Non-toxic: In normal environment within 300℃, it is physiologically inert, non-toxic and can be used as medical and food equipment.

  8. Insulation: Very good dielectric constant, high insulation.

  2. High temperature resistant insulation and fireproof casing

  High temperature resistant insulation and fireproof casing are generally suitable for protecting short or straight pipelines, cable protection, automobile wiring harnesses, and generator sets. They are reliable after installation, not easy to disassemble, and have better sealing, insulation, heat insulation and moisture-proof effects.

  Teflon pipes are the most used high-temperature insulating and fire-resistant casing, because Teflon pipes have very beneficial high-temperature resistance and insulation effects. However, I will explain the flame retardant effect in detail to prevent you from misunderstanding during use.

  Flame-retardant means that this item is not easy to burn, or will go out by itself after leaving the fire. Let me give you an example. The paper is ready at a point and can be a combustion-supporting agent to help combustion. The paper is not flame retardant.

  In order to solve everyone’s questions, I deliberately burn the Teflon tube with a lighter for one minute (the temperature of the yellow flame of the lighter is about 200℃). The Teflon tube does not have any sparks, and there is no flame leaving the fire source. The Teflon tube turns into black powder. Without the temperature of a flame, Teflon can withstand a temperature of 260°C without melting.

  Strictly speaking, Teflon tube is flame-retardant and not flame-retardant. According to Baidu's explanation of flame-retardant, "this item is not easy to burn or will go out after leaving the fire." Teflon tube is flame-retardant. But you have to use it as a kind of flame-retardant material, let it become a shield, burn at high temperature, the burning time is too long, it will turn into powder, the shield loses its protective function, and the Teflon tube will not achieve the flame-retardant effect. . So whether it is flame retardant or not depends on how you use it.

  

img

 

Picture 2: Insulation fireproof casing source: Shenzhen Dankai

  Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor is Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2021 Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号