Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
>
Features of PTFE and FEP

Information details

Features of PTFE and FEP

  • Categories:Industry news
  • Author:FEP tube lady
  • Origin:FEP tube lady
  • Time of issue:2004-08-29 10:03
  • Views:

Features of PTFE and FEP

  • Categories:Industry news
  • Author:FEP tube lady
  • Origin:FEP tube lady
  • Time of issue:2004-08-29 10:03
  • Views:

  1. PTFE

  Trade names "Teflon", "Teflon", "Teflon", "Teflon", "4F", etc., PTFE is a perfluoropolymer made by radical polymerization of tetrafluoroethylene. It has a linear molecular structure with a repeating unit of CF2=CF2. It is a crystalline polymer with a melting point of about 631°C and a density of 2.13-2.19g/CC (grams per cubic centimeter). PTFE has excellent chemical resistance, its dielectric constant is 2.1, the loss factor is low, and it is stable in a wide temperature and frequency range. It has good mechanical properties from low temperature to 550V.

  PTFE has high impact strength, but its tensile strength, wear resistance and creep resistance are worse than other engineering plastics. Sometimes glass fiber, bronze, carbon and graphite are added to improve its special mechanical properties. Its friction coefficient is lower than almost any other material, and it has a high oxygen index.

  PTFE can be made into pellets, coagulated fine powder (0.2 microns) and water dispersion. Granular resins are used for compression molding and plunger extrusion; fine powders can be extruded into thin-walled materials in paste form; dispersions can be used as coatings and impregnating porous materials.

  PTFE has a very high melt viscosity, which prevents the use of conventional melt extrusion or molding techniques. The molding and extrusion methods of granular PTFE are similar to those used for powdered metals and ceramics-first compression and then high temperature sintering; the fine powder needs to be mixed with processing auxiliary materials (such as naphtha) to form a paste, and then extruded under high pressure. The thin-walled material is heated again to remove volatile processing aids, and finally sintered.

  

img

 

Figure 1: PTFE tube source: Shenzhen Dankai

  2. Polyperfluoroethylene propylene

  FEP is a copolymer of tetrafluoroethylene and hexafluoropropylene.

  FEP has a crystal melting point of 580°F and a density of 2.15g/CC (grams per cubic centimeter). It is a soft plastic with lower tensile strength, wear resistance, and creep resistance than many engineering plastics. It is chemically inert and has a low dielectric constant (2.1) in a wide temperature and frequency range. The material does not ignite and can prevent the spread of flames. It has excellent weather resistance, low friction coefficient, and can be used from low temperature to 392 ℉. The material can be made into granular products for extrusion and molding, used as powder for fluidized bed and electrostatic coating, and can also be made into water dispersion.

  Semi-finished products include film, board, rod and single fiber. Its main purpose is to make the inner layer of pipes and chemical equipment, the surface of the drum, and various wires and cables, such as aircraft hook wires, booster cables, alarm cables, flat cables and oil well logging cables. FEP film has been used as a thin coating for solar collectors.

  

img

 

Figure 2: FEP tube source: Shenzhen Dankai

  Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor is Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong 粤ICP备12071381号